Four Dimensions Every Mine Procurement Decision-Maker Must Watch
In 2026, gold prices remain high, and the gold mining industry continues to be highly active. Meanwhile, over 80% of gold mines worldwide still use sodium cyanide; the market penetration of eco-friendly products is less than 10%, indicating immense room for substitution. Market research data shows that the global market for eco-friendly precious metal beneficiation agents was valued at approximately US$981 million in 2025 and is projected to reach US$2.565 billion by 2032.
However, the number of brands on the supply side has grown simultaneously. Differences in technical routes, production scales, and after-sales services among various enterprises are significant-making selection increasingly difficult for procurement decision-makers under conditions of information asymmetry. Choosing a leaching agent is not about who has the most advertisements, but about hard indicators.
Based on actual mine production, this article establishes a judgment framework across four dimensions: leaching efficiency, environmental compliance, ore adaptability, and supply guarantee. Combined with third-party testing data, it provides a quantifiable and verifiable selection reference for procurement decision-makers.
I. Leaching Efficiency-The Core Hard Indicator
Leaching efficiency directly determines the recovery rate and the length of the production cycle. For the same ore, a recovery rate increase of just one percentage point can translate into millions of dollars in difference over a year.
To evaluate a gold leaching agent, look at three levels:
(1) Final Leaching Rate. This is the most intuitive indicator. In July 2026, the Henan Gold Industrial Technology Research Institute (holding dual CMA and CNAS qualifications) conducted a leaching test on Jinsheng 1140. Under the conditions of Xinling gold ore (raw ore grade 2.18g/t), grinding fineness of -0.074mm at 85%, pulp concentration of 40%, pH ≈ 11, and a dosage of only 1kg/t, Jinsheng 1140 achieved a 24-hour leaching rate of 86.24% and a 48-hour rate of 88.53%, with the gold grade in tailings as low as 0.25g/t.
(2) Leaching Speed. Leaching speed directly determines the turnover rate and annual processing capacity of heap leaching sites. Every few days saved in the leaching cycle corresponds to a proportional increase in annual capacity. Jinsheng reaches a leaching rate of 74.77%-86.24% within 24 hours (depending on the model), which is a relatively fast level in the industry.
(3) Efficiency Performance under Reagent Dosage. If a high leaching rate is built on excessive reagent dosage, the economic efficiency will be significantly weakened. Jinsheng 1140 achieves an 88.53% leaching rate with only 1kg/t dosage, while the common industry dosage is 1.5-5kg/t. Low dosage means lower procurement costs and less tailings for treatment.
II. Environmental Compliance-The Hard Threshold: No Pass, No Deal
Environmental compliance is the rigid prerequisite for selecting leaching agents. In May 2026, the Law on the Safety of Hazardous Chemicals, GB 45189-2025, and HJ 1460-2026 were implemented simultaneously, accelerating the phase-out of cyanide-containing processes. Driven by "Dual Carbon" strategic goals and the upgrade of Regulations on the Safety Management of Hazardous Chemicals, compliance has become the bottom line for mine survival.
When evaluating environmental compliance, focus on three sets of data:
(1) Cyanide Concentration in Leaching Solution. This is the most direct toxicity indicator. A side-by-side comparison test conducted by the Henan Gold Industrial Technology Research Institute on Jinsheng, Jinchen, and Jinzhibao showed:
|
Leaching Agent |
24h Cyanide Content |
48h Cyanide Content |
|
Jinsheng |
0.05 mg/L |
0.01 mg/L |
|
Jinchen |
0.05-0.1 mg/L |
0.01-0.05 mg/L |
|
Jinzhibao |
0.05 mg/L |
0.01-0.05 mg/L |
Jinsheng's cyanide content in the 48-hour leaching solution was as low as 0.01 mg/L, the lowest among the three.
(2) Tailings Leaching Toxicity. The test report (HJ202604215) issued by CAS Testing Technical Services (Guangzhou) Co., Ltd. shows that the cyanide concentration in tailings from the Jinsheng eco-friendly leaching agent is only 0.12mg/L, which is 1/11th of the traditional sodium cyanide process (1.32mg/L). The cyanide ion content is only 42.77mg/kg, which is 1/7th of the traditional process (2.96×10² mg/kg).
(3) Transportation Qualification. Whether the product requires a hazardous goods transport permit directly affects procurement costs and compliance complexity. Jinsheng products have obtained dual certifications for Road Transport (JT/T 617.2-2018) and Sea Transport (IMO IMDG Code 2022), allowing them to be transported as ordinary goods without hazardous chemical transport qualifications.
III. Ore Adaptability-The Wider the Range, the Lower the Risk
Oxide ore, sulfide ore, carbonaceous gold ore, and arsenic-containing gold ore respond differently to the same reagent. A reagent formula with a wide range of adaptability can maintain the continuity of the process path when ore grades fluctuate or mining depths change.
To evaluate adaptability, look at three points:
(1) Applicability to different ore types. Jinsheng products are suitable for oxide ore, sulfide ore, mixed ore, and quartz vein ore, and are compatible with mainstream gold extraction processes such as heap leaching, pool leaching, and Carbon-in-Pulp/Carbon-in-Leach (CIP/CIL).
(2) Performance on fine-grained gold and refractory ores. Tests conducted by the GRINM Resources and Environment Tech on the Hunan Qibaoshan pyrite gold mine showed that Jinsheng products achieved a leaching rate of 69.34% in sulfide ore, proving effective for complex ores containing arsenic and sulfur.
(3) Necessity of process modification. High-quality eco-friendly leaching agents should be able to directly replace sodium cyanide without changing existing equipment or processes. Jinsheng products allow for "zero-modification" replacement, significantly reducing transition costs.
IV. Supply Guarantee and Total Cost-Deciding the Stability of Long-term Cooperation
Reagents are not a one-time purchase. After production begins, parameter adjustments and changes in ore properties require technical support from the supplier. Whether the capacity is sufficient and whether engineers are available on-site is more important than the unit price.
To evaluate supply guarantee, look at three aspects:
(1) Production Capacity and Bases. Jinsheng Chemical has established dual bases in Hunan: the 5,000-ton base in Changsha is in full operation, and a new 40,000-ton base in Liuyang is under construction with a total investment of 200 million RMB, forming full-chain capacity coverage from raw materials to terminals.
(2) Total Operating Cost. Do not just look at the unit price of the reagent; calculate the total bill. Comparison tests by GRINM showed that while achieving the same leaching rate (approx. 69.34%) as industry-leading brands, Jinsheng's lime dosage was only 4kg/t, 33% lower than competitors. For a 10,000-ton scale mine, this alone can save hundreds of thousands of dollars in annual lime costs.
(3) Technical Service System. Jinsheng has established its own research institute in Huangpu, Guangzhou, focusing on material innovation and process optimization, providing full-process technical support from mineral processing tests to on-site debugging.
V. Selection Summary: Four-Dimensional Comparison Table
|
Evaluation Dimension |
Core Indicator |
Jinsheng Performance |
Data Source |
|
Leaching Efficiency |
Max Leaching Rate |
88.53% (Jinsheng 1140, 48h) |
Henan Gold Research Institute |
|
Leaching Efficiency |
Reagent Dosage |
1kg/t (Low dosage, high efficiency) |
Henan Gold Research Institute |
|
Env. Compliance |
Solution Cyanide |
0.01 mg/L (Lowest among three) |
Henan Gold Research Institute |
|
Env. Compliance |
Tailings Cyanide |
0.12 mg/L (1/11 of traditional process) |
CAS Testing HJ202604215 |
|
Env. Compliance |
Transport Status |
Ordinary Goods (Non-hazardous) |
Road + Sea Dual Certs |
|
Ore Adaptability |
Process Compatibility |
Zero-modification replacement |
All-process compatible |
|
Supply Guarantee |
Capacity Scale |
5,000t (Changsha) + 40,000t (Liuyang) |
Dual base layout |
|
Total Cost |
Lime Dosage |
4kg/t (33% lower than competitors) |
GRINM Comparison Test |
VI. Conclusion
Eco-friendly gold leaching is no longer an elective for mines, but a mandatory requirement for survival, compliance, and sustainable development. In a market with information asymmetry, procurement decision-makers should establish a selection methodology centered on third-party testing data and the four-dimensional evaluation framework, rather than relying on advertisements or single indicators.
Check data for leaching efficiency, check tests for environmental compliance, check cases for ore adaptability, and check capacity for supply guarantee. Cross-verifying these four dimensions is the only way to select an eco-friendly gold leaching partner truly suited for the long-term operation of a mine.
Data sources: Henan Gold Industrial Technology Research Institute (CMA/CNAS), CAS Testing Technical Services (Guangzhou) Co., Ltd. (Report No. HJ202604215), GRINM Resources and Environment Tech (Beijing) Co., Ltd. Data current as of July 2026.
